Onkyo TX-SR504E Instruction Manual

Plus the front panel USB port is ready for the newest sources for music: The VSX K also features Pioneer’s exclusive Multi-Channel Acoustic Calibration system MCACC , providing an optimized multi-channel listening experience by measuring every speaker’s connection, noting its size and distance from the listening point, sound levels and timbre in order to calibrate, customize and maximize performance specifically for your room. With the unique Front Stage Surround Advance feature, you experience a virtual surround sound environment. By filling in areas where minute details were left out during the compression process, even audio like WMA, MP3 and AAC is enhanced with another Pioneer exclusive, Advanced Sound Retriever, letting you enjoy near CD quality sound from compressed music sources. There’s also an Auto Level Control, equalizing volume differences between portable audio tracks or television programming and eliminating jarring volume changes. Which means the only thing that shocks you is how good it sounds.

Onkyo TX-SR602 Instruction Manual

The simplest turntable setup is easier to put together than you might think. Yes, you can stop there, but there are further and potentially even better options. The growth of vinyl culture has spread so much that some brands now make high-end powered speakers with built-in preamps —which means you can add any turntable you want and still avoid a receiver.

Turntable setups without a receiver The budget option: They look sleek, they boast incredible sound, and, with their small footprint, they are truly minimal. I have a pair hooked up to my computer and they scream.

DON’T PAY full price for DJ Equipment and Pro-Audio Gear! We hook you up with % BEST PRICE, PAY-AS-YOU-PLAY FINANCING + FREE SHIPPING! Full Warranty & Day Returns. Authorized Dealer. Click Here >?p=2.

The original goal of this project was to recreate a stereo system similar to the one I owned in college in the early 70’s and later sold when I needed the money after college. Visually, these systems were way superior to the black front, digital read-out systems of today. And these systems were loud – designed to play rock music of the era. Why Is Vintage Stereo Collectible?

Marantz – before restoration Marantz Receiver circa with 70 watts per channel. Roger from Arizona was the original owner and he generously offered to give me the receiver. We worked out a plan where I would pay to have it shipped to a tech to restore this fine reciever. Diffuser paper also called Vellum paper replaced on the dial to improve lighting. Dial lighting is much improved without replacing the bulbs. More info, google the following:

Kenwood LS-1000

Manufacturers are currently transitioning their AV receivers toward greater network integration, and I was interested to see what progress has been made since the Denon was introduced just two years ago. Obviously these two units are meant to be direct competitors, as they have virtually identical price points, and many home theater enthusiasts looking for a receiver at the upper end of the market will probably be interested in a comparison of these two flagships.

Since I still have the Denon in-house serving as the heart of my family room system, I’m quite familiar with its performance and features. So, what did I find? Well, while these two receivers have many features in common, there are noteworthy differences in how those features are implemented. First we’ll step around the SC-LX ‘s exterior to take a look at its controls and connections.

Thanks to a first-of-a-kind patented technology, two remotes capture the turntable’s rotation information and wirelessly send this information to a receiver. The receiver will then process the information and apply it to the digital signal it generates to send it to your setup.

Kenwood’s masterpiece, becoming an instant hit in Japan – consumer and reviewer-wise. Unfortunately remaining largely unobtainable elsewhere. This was however very different than the earlier L A or KA The 01A and 02A were just two years apart from each other but they were completely different. The L A is a large two-piece arrangement: The latter holds three transformers: That box can be either attached directly to the back of the L A or separated from it as far as four meters by way of thick multi-pin cables.

DLD Dynamic Linear Drive is a dual-rail circuit operating in parallel to the normal power stage ; its switching speed reaches the Ghz. Whenever superior power output needs are sensed between the pre-driver and the driver stages, the signal is assigned to the high-power rail which “glady obliges by delivering the brief energy peak needed’. In the same vein, the Sigma Drive circuit allows a super-high damping factor by linking the loudspeakers’ returning electrical energy and the overall NFB loop.

Super-high damping factor here means 10, at 55 Hz! The link is made with a supplementary set of cables and terminals on both sides. The Sigma Drive circuit doesn’t like mishaps:

Onkyo NR3007 – TX AV Network Receiver Instruction Manual

The receiver will then process the information and apply it to the digital signal it generates to send it to your setup. Phase completely overcomes the limits of DVS technology to provide the most reliable solution for performers. Other Features Flawless performances Every rotation movement, even the tiniest, is detected by the remotes and instantly sent to the software, offering a real-time audio control with an unrivaled accuracy.

Originally, I thought the only way to eliminate the receiver from the turntable equation was to buy a turntable with a built-in preamp, and that’s what I intended to outline exclusively here—it is the truth (preach!) that those setups above are ideal options for your turntable setup at .

I’m not sure I understand how you set it up. Did you connect the turntable directly to a set of speakers? If so, that is a problem. The connections should be as follows: The posts for each speaker are typically colored red and black except sometimes for the subwoofer. Most speaker wire have two smaller pieces of wire, one dark and one light. Connect the dark part to the black post and the light part to the red post. Do the same on the back of the speakers.

Also, make sure you have the speakers wired according to where they are placed. The subwoofer usually has only one cable because there isn’t a left channel or right channel associated with it. Since you bought a surround sound package, the subwoofer cable should have come with it. Just plug the cable into the receiver and the subwoofer. That should be enough to get you sound coming out of your speakers.

Record player hookup to Surround sound

Generally there are only two such suitable inputs: A line-in computer input blue that is separate from the computer’s microphone input usually pink Failing that, a line-in input on a USB or Firewire interface. Connecting to line-in of the computer In general, you need to run an appropriate cable from an output on the external device for example a tape deck, or a phono amplifier or receiver connected to a turntable to the line-in port of the computer.

Do not connect to the mic-in port of the computer.

 · Best Answer: You guessed right. This can be accomplished, as you said, by purchasing an amplifier/receiver and appropriate speakers, or by using a boombox. Both will have input jacks for RCA plugs (pictured at the link below) › Consumer Electronics › Music & Music Players.

What devices do I have to purchase? My turntable connects directly into my receiver!! Nothing else is needed!!! Unlike other line level equipment like a cassette recorder or CD player, the output from a phono cartridge must be re-equalized via a special circuit. Thus to connect your turntable, you’ll need to purchase a phono preamp. Plug the output leads from your turntable into the input on the phono preamp and the output from the phono preamp into any of the available line level inputs on your receiver e.

Onkyo Product Support Forum for USA & Canada

Audio-Technica 55 Comments Question: Audio-Technica offers a variety of turntables that differ slightly in operation and features. The AT-LP60 turntable is a popular choice for casual listening. Belt and tone arm setup Carefully remove the turntable from the packaging and verify that all of the parts and accessories are present. Turntable with dust cover and pre-installed cartridge and stylus Die-cast aluminum platter with the drive belt attached to the bottom ring of the platter.

Audio-Technica slip mat, 45 RPM adapter, two stereo audio adapter cables, and the user manual.

A channel receiver; high-end style and feel; graphic-display remote; all-digital hookup for compatible Denon SACD/DVD-A players; turntable input; versatile surround speaker switching. This is a high quality unit. Do some research and recognize that this is a sweet purchase. Complete with original remote.

First let’s take a look on the cable that connects the turntable to the receiver. This cable is shown on Figure 1. It has three plugs on each end, one red or yellow RCA standard, one white or black RCA standard and one ground wire with an “Y” shaped terminal. Cable used to connect your turntable to your receiver. Locate on the rear of your turntable were the plugs are connected. You will find two female RCA connectors and one thumb screw to connect the ground wire, see Figure 2.

The correct grounding is very important, because if this wire isn’t connected or has a bad connection you will get noise “hum” noise. This color scheme for cable connection will be the same from here on. Turntable with its cable correctly installed. The other end of the cable you will need to connect to the receiver. You cannot connect your turntable directly to your PC, you must use a receiver.

Kenwood L-02A

These mistakes can range from simple problematic issues to things that could quickly lead to premature device failure. Let me quickly explain why. Every cable has inherent resistance. The thinner the cable, the more resistance the cable will have. There are other factors as well, but this is the big one.

Owner’smcmuai AdventModel FM Stereo Receiver. Contents W/o 1 Introduction 15 Troubleshooting guide 4 Source connections Turntable connection Tape deck connection Auxiliary connections Convenience outlet Antenna 6 Operating Controls 8 Notes on operating the Model Volume depend on proper hookup of its components.

Fresno, California duse said: I did a search and figure I could tie my question in to this thread, since technically it is a “Turntable to Receiver Question. I say “had” because I can further give a thumbs up to the statement “Absolutely nothing good can happen when you mess with stuff that is powered on I was able to quiet the hum to nil once I got the grounded wire situated. I put on the reissue of Gish. I’ve done some research and cannot determine what the problem could be.

I understand that “louder is not better,” but it goes further than that. I had noticed it with the other amp, but not to this level. I am not sure what type of cartridge that ECD is. It is not listed on AT’s site. I read that one type is quieter than another, but then again, that is not such a bad thing. Any suggestions about what I can do? I did find a NAD on Craiglist. Not sure if this is the time to upgrade, or that is actually an upgrade in itself.

How to Connect a Turntable to Speakers Featuring the Audio Technica AT-LP60